International Chemical Safety Cards

PHOSGENE ICSC: 0007
PHOSGENE
Carbonyl chloride
Chloroformyl chloride
(cylinder)
COCl2
Molecular mass: 98.9
CAS # 75-44-5
RTECS # SY5600000
ICSC # 0007
UN # 1076
EC # 006-002-00-8
TYPES OF
HAZARD/
EXPOSURE 		ACUTE HAZARDS/
SYMPTOMS 		PREVENTION FIRST AID/
FIRE FIGHTING
FIRE Not combustible.
NO open flames. NO contact with oxidizing agents, ammonia.
Foam, powder, carbon dioxide. NO water. In case of fire in the surroundings: remove all phosgene-containing vessels.
EXPLOSION

In case of fire: keep cylinder cool by spraying with water but NO direct contact with water.
EXPOSURE
AVOID ALL CONTACT!
IN ALL CASES CONSULT A DOCTOR!
  • INHALATION
    		• Corrosive. Burning sensation. Cough. Laboured breathing. Shortness of breath. Sore throat.
    		Local exhaust or breathing protection. Closed system and ventilation.
    		Fresh air, rest. Half-upright position. Artificial respiration if indicated. Refer for medical attention.
  • SKIN
    		• Corrosive. Redness. Skin burns. ON CONTACT WITH LIQUID: FROSTBITE.
    		Cold-insulating gloves. Protective clothing.
    		Remove contaminated clothes. ON FROSTBITE: rinse with plenty of water, do NOT remove clothes. Rinse skin with plenty of water or shower. Refer for medical attention. Wear protective gloves when administering first aid.
  • EYES
    		• Corrosive. Redness. Pain. Blurred vision.
    		Face shield, or eye protection in combination with breathing protection.
    		First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
  • INGESTION



    • SPILLAGE DISPOSAL STORAGE PACKAGING & LABELLING
    Evacuate danger area! Consult an expert! Ventilation. Cautiously neutralize spilled liquid with sodium bicarbonate or equal mixture of soda ash and slaked lime. (extra personal protection: complete protective clothing including self-contained breathing apparatus).
    		Fireproof if in building. Isolated from work area. Separated from strong oxidants, and ammonia. Cool. Dry.

    T+ symbol
    R: 26
    S: 7/9-24/25-45
    UN Haz Class: 2.3
    UN Subsidiary Risks: 8
    SEE IMPORTANT INFORMATION ON BACK
    ICSC: 0007 Prepared in the context of cooperation between the International Programme on Chemical Safety & the Commission of the European Communities © IPCS CEC 1993

    International Chemical Safety Cards

    PHOSGENE ICSC: 0007

    I
    M
    P
    O
    R
    T
    A
    N
    T

    D
    A
    T
    A
    PHYSICAL STATE; APPEARANCE:
     COLOURLESS GAS . COLOURLESS TO YELLOW COMPRESSED LIQUEFIED GAS , WITH CHARACTERISTIC ODOUR.

    PHYSICAL DANGERS:
     The vapour is heavier than air and may travel along the ground.

    CHEMICAL DANGERS:
     The substance decomposes on heating above 300░C, producing toxic and corrosive gases: hydrogen chloride and carbon monoxide, chlorine fumes. Reacts violently with strong oxidants. Reacts slowly with water producing corrosive, pungent and toxic gases. Reacts violently with amines, with aluminium. Attacks many metals in presence of water. Attacks metal, plastic, rubber.

    OCCUPATIONAL EXPOSURE LIMITS (OELs):
     TLV: 0.1 ppm; 0.40 mg/m3 (ACGIH 1992-1993)
    PDK: 0.5 mg/m3 (USSR 1987)


    		 ROUTES OF EXPOSURE:
     The substance can be absorbed into the body by inhalation.

    INHALATION RISK:
     A harmful concentration of this gas in the air will be reached very quickly on loss of containment.

    EFFECTS OF SHORT-TERM EXPOSURE:
     The substance is corrosive to the eyes, the skin, the respiratory tract. Inhalation of this gas may cause lung oedema (see Notes). Rapid evaporation of the liquid may cause frostbite. Exposure to high level may result in death. The effects may be delayed. Medical observation is indicated.

    EFFECTS OF LONG-TERM OR REPEATED EXPOSURE:
     The substance may have effects on the lungs , resulting in fibrosis, impaired functions.
    PHYSICAL
    PROPERTIES
    Boiling point: 8░C
    Melting point: -118░C
    Relative density (water = 1): 1.4
    		 Solubility in water: reaction
    Vapour pressure, kPa at 20░C: 161.6
    Relative vapour density (air = 1): 3.4
    ENVIRONMENTAL
    DATA
         		It is strongly advised not to let the chemical enter into the environment.
    NOTES
    The symptoms of lung oedema often do not become manifest until a few hours have passed and they are aggravated by physical effort. Rest and medical observation is therefore essential. Immediate administration of an appropriate spray, by a doctor or a person authorized by him/her, should be considered. The odour warning when the exposure limit value is exceeded is insufficient. Do NOT spray water on leaking cylinder (to prevent corrosion of cylinder). Turn leaking cylinder with the leak up to prevent escape of gas in liquid state.
    Transport Emergency Card: TEC (R)-107
    NFPA Code: H4; F0; R0;
    ADDITIONAL INFORMATION


    ICSC: 0007 PHOSGENE
    © IPCS, CEC, 1993
    IMPORTANT LEGAL NOTICE: Neither the CEC or the IPCS nor any person acting on behalf of the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use.